BB malossi zylinder, from what a moto ??

Hi!

Malossi do not produce this cylinder any more.
Its a tuning-cylinder for the YAMAHA DT (or RD) 80 MX.

The producer PARMAKIT will produce a cylinderkit for the DT 80 MX in future but they do actualy not produce it.

hmmm not the same but they are nearly the same...

the history of "Big Bore"

the first BB-Kits ware based at a 97ccm Zylinder from the producer "ZETA".
the end of those kits was that zeta did not exist any more

so the alternative was to use the cylinder-kit from "MALOSSI" with 97ccm, too.

but since one or two years did Malossi not more produce the cylinders for the DT 80 MX.

in future parmakit will produce the formaly zeta-cylinder. of course no one knows how bad or good the parmakit-cylinder will be but some think it will be nearly the same like the zeta.

we can only wait for the parmakit-cylinder.

the 97ccm BBs from RZT, Langtuning, MRT, SM and RT are allways the same base... malossi and former zeta. but the cylinder from malossi and those from zeta are different. the malossi has more power and more reservs as the zeta.

hi... my english is almost very bad! but you shurely dont know this because yours not so well, too.

the Leo Vinci Exhaust is produced for simson. it is not taken from an other moto.

why do you want to find it at this page? you can by these exhaust at every stupid simson-shop! it cost between 50-60 €.

but the leo vinci exhaust do not work very well at 95% of all cylinders!

most persons do pimp the leo vinci because it is a good base for tuning. but it is not useable in the origin size.