Beiträge von Phyton

Ich habe serienauspuff mit tuning von http://%22http//www.reichtuning.de%22 ritzel vorne ist 16 zahne. Meine simson ist roller

maybe I do shliff und ankommen it

maybe he verwischen sich

krummer hat a 25 cm long

Input have 16 but I say I have a 16 mm vergasser, my tuner say optilmal vergasser for this zylinder is 18-19 mm. When I drive 75 km/h, my U/min end, they as some as orginal serial simson

480 km, oil Mobil extra 2T, tomorow I go to my friend, he has 16N1, maybe he change with me

My simson 60/4 kanal drive 75 km/h I have a Bing 15 mm vergasser , I think vergasser is too small to this engine I can buy 16N1 vergasser

on leovince site haven't leovince for simson

Ok, thank You :D. From what a moto have leovince for simson ???
I'm sorry my english is not good

In some site I see : Malossi 97 ccm zylinder, parmakit zylinder is same as big bore zylinder in RZT

From what a moto have a malossi big bore zylinder for simson, I look at malossi site and in the site haven't zylinder for simson

I know, I have a plenty of plane auspuff tuning, my tuner say me haw this look, now reso is 8500 U/min

Yes I ask tuner and he say, http://%22http//www.reichtuning.de%22 und bauplane, in this part is picture with auspuff, in poland is very very small treffen

I have this picture and plenty of this type picture und exel documnets but I dont understand what must cut behind blau und rot line, I cut in orginal auspuff Schranke in Kegel and schweissen Loch in kegel. Mein zylinder ist von tuners from poland.

how exhaust for 60/4kanal. I have exhaust without TUV http://www.tkm-racing.com/pictures/S161.jpg becouse in poland leovince costed 90 euro . My krummer have 25 cm long. Please help me

ok, how many U/min, in poland is uber 10000 u/min

thank You very much . How many PS this zylinder or how many U/min und speed ????

this zylinder in picture above is 12000 obr/min and it is in his simson and work OK, my zylinder have 10000 obr/min

In Dienstag all clear, I think all OK. This man tuned yamaha YZ 85 16000 obr/min. Zylinder for simson is old, only modification and shlif, maybe on this picture is not complete modification, when I get a zylinder I take o photo and send on this forum and when I (in poland "dotrzeć", 500 km drive) I send video with my simson in action

please sharing this movie again, I have 60/4 in monday. Ich mochte watch simson in action