Hello i Ich brauche Scheinwerfer/scheinwerferglas fur kr51/1 bilux 15w, alle Geschäfte ich versuche ''Zur Zeit nicht am Lager''
Hello my bilux 15w head lamp glass is broken on my 1968 kr51/1 all the shops i try are 'out of stock' .It is my MOT ( TUV) soon any ideas were to buy a new headlamp
Danke
[h=1][/h]
Kupplung jetzt repariert ,danke
Clutch repaired now, i made a tool like CmStorm ,thanks again
Simson Stütznippel (für Druckfeder vom Kupplungkorb) S50, KR51/1, SR4- | eBay
http://%22http//www.simsonfor…em339057418b%22
This is washer? (I think),maybe i can buy pin in ireland
Thanks that looks good .Who sells the little locking pins and washers if i lose one? I have found springs on ost2rad but not the 2mm small pins
Thanks looks difficult. (I might pay a mechanic)
Ok i took clutch cover off tonight (and got scared). Is there a special tool? .I have searched ost2rad for tools. I have looked on youtube for tutorials. There are lots for simson s51 but not kr51/1
http://images.waskowski.de/blog-waskowski…on-Schwalbe.jpg
Nochmals vielen Dank für Hilfe
Thanks i will order the rebuild kit with correct oil ( it is only 15 euros)
Danke ist normaler Ost2rad Standard Kupplung OK für 63cc Zylinder ZT
Thanks is standard clutch Ok for 63 zt-tuning cylinder . It is much cheaper
Danke
http://www.77lubricants.nl/fileadmin/user…L_EP_80W-90.pdf
Ist das Getriebeöl OK (preiswert vielleicht nicht gut)? Alte Öl war sehr schmutzig
Thanks i just used ep80/90 same as for my car. It was cheap oil,maybe it is not good? Old oil was very dirty
Hello sorry about writing in english. I have kr51/1 with 63cc cylinder from ZT -tuning. My clutch is slipping at high revolutions. I was thinking of this replacement clutch from ZT-tuning or should i just fit new linings to my original clutch
Kupplungspaket einbaufertig für KR51/1, SR4-2, SR4-3, SR4-4, S50
Do i need special tools to install?
Thanks
Trail Tech || TTO Temp Meter - Black - 14mm Spark Plug Sensor
Ich habe dieses Messgerät gekauft
Zylinderkopftemperatur ist 300-350 fahrenheit
diese scheint sehr, sehr heiß
Simson kr51/1 63cc zylinder
Hello sorry about poor german . I have bought a temperature gauge that screws into spark plug. Bike runs at 300- 350 fahrenheit . I think this is very hot?
Thanks
S 63 (KR51/1) Zylinderkit Stage 1, 164,95 €
Hello ich habe simson kr51/1 mit ZT-tuning 63cc zylinder .
ist Zündzeitpunkt 1.5mm or 1.8mm bitte
Hello i have fitted 63cc cylinder from ZT -tuning is ignition timing still 1.5mm or should i change to 1.8mm simson KR51/1 schwalbe (1968 jahr)
[Blockierte Grafik: http://i1306.photobucket.com/albums/s562/nx6h/simson_zps348fd687.jpg]
Hello sorry about posting in english should there be a cover or filter on top of the round metal pressing? My bike has nothing fitted . What is missing? Thanks
Gibt es einen Filter oder fehlende Abdeckung danke 1968 kr51/1
Hello Ich hatte Hinterrad durchstechen. Meine Schwalbe hat vier Gummidichtring, ist das richtig?
Hello i had puncture in rear tyre,my rear wheel has FOUR oil-seals fitted ,is this correct
Danke
alte schmutzige Öl 250cc,
neue, saubere Öl 450cc
Betriebsanleitung schreibt 500cc fur simsonkr51/1
Thank you old oil was only 250ml, i put in 450ml of new oil through side cover but my manual says to put in 500ml.Is this OK
Hello sorry about writing in english. I want to fill my gearbox with new oil. I thought this was filling plug but there is a steel rod blocking it when i unscrew the plug. Help please
[Blockierte Grafik: http://i1306.photobucket.com/albums/s562/nx6h/IMG_0889_zps77cc6718.jpg]
[Blockierte Grafik: http://i1306.photobucket.com/albums/s562/nx6h/IMG_0888_zpsf6d44eb4.jpg]
Thanks I have english manual for KR51/2 but cannot find an english one for kr51/1
